Air Dryer Water Blower for Wire and Cable Extrusion Line

The water blower device is widely used for its energy saving, environmental protection and economy, especially for wire and cable production industry.With the fluid principle of material science, it can quickly dry the surface moisture of wire, and achieve the effect of gas saving, high efficiency and low noise. Single section water blower device line. The speed can reach 1000m/min, and the line speed of double section water blower device can reach 1500m/min, which can easily meet the requirements of production line.

An air dryer water blower is a piece of equipment used in the wire and cable extrusion process to dry and cool the extruded cable or wire. It uses a blower to direct a high volume of air onto the cable or wire as it passes through the equipment, which helps to remove moisture and cool the material.

The air dryer water blower typically consists of a chamber or tunnel through which the extruded cable or wire is passed. The blower is located within the chamber and directs the airflow onto the cable or wire. The blower is designed to provide a high volume of airflow, which helps to cool and dry the material.

In some cases, a water blower may also be used in conjunction with the air dryer. The water blower directs a high volume of water onto the cable or wire to help cool and remove any remaining moisture. The use of water in combination with air can help to achieve faster and more effective drying and cooling of the material.

The air dryer water blower is particularly effective at removing moisture from the cable or wire as it passes through the equipment. This is important in the wire and cable extrusion process to prevent defects in the finished product, such as brittleness, cracking, or degradation.

Overall, the air dryer water blower is an important piece of equipment in the wire and cable extrusion process. It helps to ensure that the extruded material is of high quality and meets the required performance and safety standards.