Application
It is suitable for hard and inelastic surface or uneven cable printing, network line, optical cable, nylon hose, etc., the text on the printing wheel will be transferred to the surface of the silicone wheel, and then transferred to the surface of the printed material through the silica wheel.
Causes and solutions
1. Printing Streaking
Causes
Solutions
(1). Abrasion of ink scraper
Replace the scraper.
(2). The ink is too thick
Mix the ink according to the standard.
(3). Abrasion of printing wheel
Replace the printing wheel
(4). The distance between the mixer wheel and the printing wheel is too far
Adjust the distance
2. Incomplete printing/half-printing
| Causes | Solutions |
| (1)．The crimping wheel is not adjusted properly |
a.Adjust the position of the crimping wheel and guide wheel. b.Check that the crimping wheel is running smoothly. |
| (2)．Crimping wheel size | Choose suitable crimping wheel |
| (3)．The tension of the pay-off stand is unstable | Adjustable the pay off tension |
| (4)．Abrasion of printing wheel | Replace the printing wheel |
3. Printed with watermark
| Causes | Solutions |
| (1)．The water was not dried before printing | Adjust the blowing water outlet to keep the wire dry |
| (2)．The ink is too thick | Mix the ink according to the standard |
| (3)．The printing wheel has darker engraving | Scraper the blade tightly |
4. Blurred printing
| Causes | Solutions |
| (1)．The scraper is too tight | Adjust the scraper blade tightness |
| (2)．The ink is too thick | Mix the ink according to the standard |
| (3)．The printing wheel and the mixer wheel are pressed tightly | Adjustable distance |
| (4). Water in the ink | Re-mix the ink |
| Causes | Solutions |
| (1)．There is a chip on the edge of the printing wheel | Replace the printing wheel |
| (2)．There is dry ink on the edge of the printing wheel that has not been cleaned | Clean the printing wheel |
| (3)．Printing wheel lugs not installed | Install the printing wheel lugs |
| (4)．The ink is too thick | Mix the ink according to the standard |
Contact: Mrs.YoYo
Phone: +86-13902307496
Tel: +86-0769-86298298
Email: yoyo@fibercablemachine.com
Add: Jinhui Building, No. 68 zhongtang Section, Guansui Road, Zhongtang Town, Dongguan City, Guangdong Province）