Fiber optic cable crush test equipment meets the requirements of IEC-60794-1-21 Method E3/E12,According to the detailed specifications, the cable is placed under compression and then the fiber is attenuated.
It uses a servo control system to apply compressive force to the cable at a constant speed and maintain compression for a specific period of time.
The plate is mounted on the bottom of the movable crosshead to allow the cable sample to be crushed
A crushing force is uniformly applied between the steel substrate and the movable steel plate over the length of the sample.
| Item | spec. |
|
Product model |
GFK-10 |
|
Max load |
10KN |
|
Load measurement range |
(1%~100%) F.S. |
|
Load resolution |
±250000 yard,no stepping, no change in full scale,resolution unchanged |
|
Load accuracy |
±0.5% |
|
Load duration |
≥3 Hours, set arbitrarily |
|
Load hold accuracy |
±0.5% |
|
Displacement resolution |
0.001mm |
|
Displacement control resolution |
0.00002mm |
|
Displacement speed range |
(0.01～500) mm/min,set arbitrarily |
|
Displacement speed accuracy |
±0.5% |
|
Distance of travel |
200mm |
|
Compression platen |
(100×100) mm, hardness HB240～280 |
|
Max diameter of clamping optical cable |
30mm |
|
Equipment weight |
About 180kg |
Contact: Mrs.YoYo
Phone: +86-13902307496
Tel: +86-0769-86298298
Email: yoyo@fibercablemachine.com
Add: Jinhui Building, No. 68 zhongtang Section, Guansui Road, Zhongtang Town, Dongguan City, Guangdong Province）
